Penilaian Kualitas Instrumen Media Pengajaran Portal E-Modul Materi Sistem Peredaran Darah
Abstract
Utilization of good media can be used as an optimization of students in carrying out the learning process. The E-module of the Circulatory System is one of the transformation media resulting from technological developments that can attract students' attention and interest in reading. In this study, to produce the E-module of the Circulatory System as a quality media, it is necessary to evaluate 3 constructs, namely product design, information contained, and product effectiveness. Data collection techniques were carried out by filling out online questionnaires with data processing analysis using SPSS version 23. The results of testing the validity of the Corrected Item – Total Correlation value were above 0,3; and reliable as evidenced by the coefficient on Cronbach's alpha > 0,6, which is 0,69. The results of the analysis show that the instruments used meet the valid and reliable criteria. Therefore, the Circulatory System E-module can be used for learning.
Full text article
References
Adri, M., Wahyuni, T. S., Zakir, S., & Jama, J. (2020). Using ADDIE instructional model to design blended project-based learning based on production approach. International Journal of Advanced Science and Technology, 29(06), 1899–1909.
Akhsan, H., Wiyono, K., Ariska, M., & Melvany, N. E. (2020). Development of HOTS (higher order thinking skills) test instruments for the concept of fluid and harmonic vibrations for high schools. Journal of Physics: Conference Series, 1480(1), 12071.
Amelia, A., Muslim, M., & Chandra, A. F. (n.d.). KARAKTERISTIK INSTRUMEN NON-TES SUSTAINABILITY AWARENESS MENGGUNAKAN ANALISIS RASCH MODEL MATERI PEMANASAN GLOBAL UNTUK SISWA SEKOLAH MENENGAH. WaPFi (Wahana Pendidikan Fisika), 5(2), 49–56.
Asrial, S., Kurniawan, D. A., Chan, F., Septianingsih, R., & Perdana, R. (2019). Multimedia innovation 4.0 in education: E-modul ethnoconstructivism. Universal Journal of Educational Research, 7(10), 2098–2107.
Astalini, A., Darmaji, D., Kurniawan, W., Anwar, K., & Kurniawan, D. (2019). Effectivenes of Using E-Module and E-Assessment.
Baharuddin, B. (2018). ADDIE model application promoting interactive multimedia. IOP Conference Series: Materials Science and Engineering, 306(1), 12020.
Bamrara, A., & Chauhan, P. (2018). Applying ADDIE model to evaluate faculty development programs. International Journal of Smart Education and Urban Society (IJSEUS), 9(2), 25–38.
Bariah, S. K. (2019). Rancangan pengembangan instrumen penilaian pembelajaran berbasis daring. Jurnal Petik, 5(1), 31–47.
Bashooir, K., & Supahar, S. (2018). Validitas dan reliabilitas instrumen asesmen kinerja literasi sains pelajaran fisika berbasis STEM. Jurnal Penelitian Dan Evaluasi Pendidikan, 22(2), 219–230.
Bodaghi, A., & Grailoo Tanha, S. (2021). Module approximate biprojectivity and module approximate biflatness of Banach algebras. Rendiconti Del Circolo Matematico Di Palermo, 70(1), 409–425. https://doi.org/10.1007/s12215-020-00503-8
Darmaji, D., Astalini, A., Kurniawan, D., Parasdila, H., Irdianti, I., Susbiyanto, S., Kuswanto, K., & Ikhlas, M. (2019). E-module based problem solving in basic physics practicum for science process skills.
Deich, T., Storch, M., Steiner, K., & Bund, A. (2021). Effects of module stiffness and initial compression on lithium-ion cell aging. Journal of Power Sources, 506(June), 230163. https://doi.org/10.1016/j.jpowsour.2021.230163
Farida, N., Sesanti, N. R., & Ferdiani, R. D. (2019). MAHASISWA PADA MATA KULIAH KAJIAN DAN PENGEMBANGAN MATEMATIKA SEKOLAH 2 Universitas Kanjuruhan Malang PENDAHULUAN Pendidikan adalah usaha sadar yang bertujuan untuk mengembangkan kualitas manusia sebagai suatu kegiatan yang sadar akan tujuan . Maka dalam . 4(2), 135–146.
Febro, J. D., Catindig, M. A. C., & Caparida, L. T. (2020). Development of e-learning module for ICT skills of marginalized women and girls for ICT4D. International Journal of Emerging Technologies in Learning, 15(16), 94–105. https://doi.org/10.3991/ijet.v15i16.14929
Ghani, M. T. A., & Daud, W. (2018). Adaptation of ADDIE instructional model in developing educational website for language learning. Global Journal Al-Thaqafah, 8(2), 7–16.
Hamdani, H., Yanto, D. T. P., & Maulana, R. (2019). Validitas Modul Tutorial Gambar Teknik dan Listrik dengan Autocad. INVOTEK: Jurnal Inovasi Vokasional Dan Teknologi, 19(2), 83–92.
Handayani, D., Elvinawati, E., Isnaeni, I., & Alperi, M. (2021). Development Of Guided Discovery Based Electronic Module For Chemical Lessons In Redox Reaction Materials. Int. J. Interact. Mob. Technol., 15(7), 94–106.
Hidayah, T. (2019). Penerapan Model Pembelajaran Berbasis Masalah dalam Meningkatkan Keterampilan Berpikir Kritis Pokok Bahasan Probabilitas Mata Kuliah Statistik pada Perguruan Tinggi AMIK DCC Bandar Lampung. MUST: Journal of Mathematics Education, Science and Technology, 4(2), 197. https://doi.org/10.30651/must.v4i2.2976
Hidayat, A. A. (2021). Menyusun Instrumen Penelitian & Uji Validitas-Reliabilitas. Health Books Publishing.
Iswati, L. (2019). Developing ADDIE model-based ESP Coursebook. Indonesian EFL Journal, 5(2), 103–112.
Janna, N. M., & Herianto, H. (2021). Konsep Uji Validitas dan Reliabilitas dengan Menggunakan SPSS.
Kohli, R., & Melville, N. P. (2019). Digital innovation: A review and synthesis. Information Systems Journal, 29(1), 200–223. https://doi.org/10.1111/isj.12193
Laili, I. (2019). Efektivitas pengembangan e-modul project based learning pada mata pelajaran instalasi motor listrik. Jurnal Imiah Pendidikan Dan Pembelajaran, 3(3), 306–315.
Lestari, H. D., & Parmiti, D. P. (2020). Pengembangan e-modul IPA bermuatan tes online untuk meningkatkan hasil belajar. Journal of Education Technology, 4(1), 73–79.
Lestari, L., Alberida, H., & Rahmi, Y. L. (2018). Validitas dan praktikalitas lembar kerja peserta didik (LKPD) materi kingdom plantae berbasis pendekatan saintifik untuk peserta didik kelas X SMA/MA. Jurnal Eksakta Pendidikan (JEP), 2(2), 170–177.
Nambisan, S., Wright, M., & Feldman, M. (2019). The digital transformation of innovation and entrepreneurship: Progress, challenges and key themes. Research Policy, 48(8), 103773. https://doi.org/10.1016/j.respol.2019.03.018
Novrianto, R., Marettih, A. K. E., & Wahyudi, H. (2019). Validitas konstruk instrumen general self efficacy scale versi Indonesia. Jurnal Psikologi, 15(1), 1–9.
Scherer, R., Siddiq, F., & Tondeur, J. (2019). The technology acceptance model (TAM): A meta-analytic structural equation modeling approach to explaining teachers’ adoption of digital technology in education. Computers and Education, 128, 13–35. https://doi.org/10.1016/j.compedu.2018.09.009
Seruni, R., Munawaroh, S., Kurniadewi, F., & Nurjayadi, M. (2020). Implementation of e-module flip PDF professional to improve students’ critical thinking skills through problem based learning. Journal of Physics: Conference Series, 1521(4), 42085.
Sidiq, R. (2020). Pengembangan E-Modul Interaktif Berbasis Android pada Mata Kuliah Strategi Belajar Mengajar. Jurnal Pendidikan Sejarah, 9(1), 1–14.
Solikin, I. (2018). Implementasi E-Modul pada Program Studi Manajemen Informatika Universitas Bina Darma Berbasis Web Mobile. Jurnal RESTI (Rekayasa Sistem Dan Teknologi Informasi), 2(2), 492–497.
Spatioti, A. G., Kazanidis, I., & Pange, J. (2022). A comparative study of the ADDIE instructional design model in distance education. Information, 13(9), 402.
Syahlani, A., & Setyorini, D. (2021). Pengembangan instrumen minat belajar matematika siswa (non tes skala Likert). Jurnal Akrab Juara, 6(1), 19–30.
Trust, T., & Pektas, E. (2018a). Using the ADDIE model and universal design for learning principles to develop an open online course for teacher professional development. Journal of Digital Learning in Teacher Education, 34(4), 219–233.
Trust, T., & Pektas, E. (2018b). Using the ADDIE Model and Universal Design for Learning Principles to Develop an Open Online Course for Teacher Professional Development. Journal of Digital Learning in Teacher Education, 34(4), 219–233. https://doi.org/10.1080/21532974.2018.1494521
Vial, G. (2019). Understanding digital transformation: A review and a research agenda. Journal of Strategic Information Systems, 28(2), 118–144. https://doi.org/10.1016/j.jsis.2019.01.003
von Briel, F., Davidsson, P., & Recker, J. (2018). Digital technologies as external enablers of new venture creation in the it hardware sector. Entrepreneurship: Theory and Practice, 42(1), 47–69. https://doi.org/10.1177/1042258717732779
Wardhani, U. K., & Setiyarsih, W. (2021). Kajian Literatur Pengembangan Instrumen Kemampuan Problem Solving Pada Materi Fisika. IPF: Inovasi Pendidikan Fisika, 10(2), 16–27. https://doi.org/10.26740/ipf.v10n2.p16-27
Widodo, W., Sudibyo, E., Suryanti, Sari, D. A. P., Inzanah, & Setiawan, B. (2020). The effectiveness of gadget-based interactive multimedia in improving generation z’s scientific literacy. Jurnal Pendidikan IPA Indonesia, 9(2), 248–256. https://doi.org/10.15294/jpii.v9i2.23208
Yusup, F. (2018). Uji validitas dan reliabilitas instrumen penelitian kuantitatif. Tarbiyah: Jurnal Ilmiah Kependidikan, 7(1).
Zulkifli, H., Razak, K. A., & Mahmood, M. R. (2018). The usage of ADDIE model in the development of a philosophical inquiry approach in moral education module for secondary school students. Creative Education, 9(14), 2111.
Authors
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-NonCommercial 4.0 International License that allows others to share the work with an acknowledgment of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published workÂ