SECURING THE RESTRICTED AREA AT INLET 491-AC1 FROM THE DANGER OF HOT MATERIAL DURING KILN UPSET BY INSTALLATION OF HEAT DETECTION EQUIPMENT AND MATERIAL SPILLAGE LEVEL

Penulis

  • Rizkhi Nugroho Universitas Muhammadiyah Surabaya
  • Hadi Kusnanto Universitas Muhammadiyah Surabaya

Abstrak

On February 18, 2023, an incident occurred at Tuban Plant factory. Namely a work accident that happened to a senior employee from the Fire & Rescue division. This incident occurred in a restricted area where evacuation access was limited and there was no telephone signal because it was located underground. Therefore, the author decided to make and install a safety device in the form of a temperature or heat detector and material level to provide warnings in the form of danger lights and sounds from horns in the area. After the tool is installed, temperature monitoring can be done on the local panel and also from the Technical Information System (TIS). After installation, from HIRAC calculations this tool succeeded in reducing the risk score by 95%, from initially 360 (high) to 18 (low). Apart from that, this tool can also save IDR 39,974,495 per hour from the initial handling time before the tool was 66.3 hours.

Biografi Penulis

Rizkhi Nugroho, Universitas Muhammadiyah Surabaya

Mechanical Engineering Department

Hadi Kusnanto, Universitas Muhammadiyah Surabaya

Mechanical Engineering Department

Referensi

Autonics Corporations. (2023, October 12). Autonics TX4S-14R. Https://Www.Autonics.Com/Model/H1500002155.

Berger, E. E. (1929). Calcium sulphate retarders for Portland cement clinker (Vol. 451). US Government Printing Office.

Corporate OHS. (2020). Identifikasi Bahaya Penilaian Resiko dan Pengendaliannya. In PT Solusi Bangun Indonesia dan seluruh anak perusahaannya. Corporate OHS.

Dylan Moore. (2010). Cementkilns. Berne Convention. https://www.cementkilns.co.uk/intro.html

Ferdyansyah, F., & Rahmat, R. S. (2022). Alat Pendeteksi Kebakaran dan Pemadam Api Otomatis Menggunakan Kontrol Arduino. Jurnal Teknik Mesin Dan Mekatronika (Journal of Mechanical Engineering and Mechatronics), 7(2), 77–89.

Ferri, F. F. (2012). Ferri’s Netter Patient Advisor E-Book. Elsevier Health Sciences.

Granger, J., Estrada, C. M., Abramo, T. J., Grant, V. J., & Tothy, A. (2009). An evidence-based approach to pediatric burns. Pediatric Emergency Medicine Practice, 6(1), 1–17.

Haagsma, J. A., Graetz, N., Bolliger, I., Naghavi, M., Higashi, H., Mullany, E. C., Abera, S. F., Abraham, J. P., Adofo, K., & Alsharif, U. (2016). The global burden of injury: incidence, mortality, disability-adjusted life years and time trends from the Global Burden of Disease study 2013. Injury Prevention, 22(1), 3–18.

Hargiyarto, P. (2003). Pencegahan dan Pemadaman Kebakaran. Universitas Negeri Yogyakarta. Yogyakarta.

Harley, J. (2007). The impact of cement kilns on the environment. Briefing Paper South Africa, 1–12.

Herndon, D. (n.d.). Chapter 1: A Brief History of Acute Burn Care Management. Total Burn Care . Edinburgh: Saunders, 2012. ISBN 978-1-4377-2786-9.

Herndon, D. (2012). Chapter 4: Prevention of burn injuries. Total Burn Care (4th Ed.). Edinburgh: Saunders, 46.

Karyono, T. H. (2001). Penelitian kenyamanan termis di Jakarta sebagai acuan suhu nyaman manusia Indonesia. DIMENSI (Journal of Architecture and Built Environment), 29(1).

Keinsinyuran. (2018, August 11). Apron Conveyors. Https://Www.Keinsinyuran.Com/Kamus/Apron-Conveyors/.

Muhammad Nursayyidan. (2016, August 14). Pengertian PT100. Https://Elektronika64.Wordpress.Com/2016/08/14/Pengertian-Pt100/.

Peray, K. E., & Waddell, J. J. (1986). The rotary cement kiln. Edward Arnold New York, NY, USA.

Polysius Asia Pasific Pte. Ltd. (2012). Proses Flowsheet TUBAFA.

PT. Solusi Bangun Indonesia. (2013). Tuban Plant. In Workdir Document.

Rivaldo, A., Susanto, I., & Nugroho, R. (2020). Mencegah Stop Raw Mill Akibat Kerusakan Head Shaft Apron Conveyor 332-AC1. Jurnal Mekanik Terapan, 1(2), 142–151.

Stokes, M. A. R., & Johnson, W. D. (2017). Burns in the Third World: an unmet need. Annals of Burns and Fire Disasters, 30(4), 243.

Tintinalli, J. E., Stapczynski, J. S., Ma, O. J., Yealy, D. M., Meckler, G. D., & Cline, D. M. (2016). Tintinalli’s Emergency Medicine: A Comprehensive Study Guide, 8e. McGraw Hill Education.

Vos, T., Allen, C., Arora, M., Barber, R. M., Bhutta, Z. A., Brown, A., Carter, A., Casey, D. C., Charlson, F. J., & Chen, A. Z. (2016). Global, regional, and national incidence, prevalence, and years lived with disability for 310 diseases and injuries, 1990–2015: a systematic analysis for the Global Burden of Disease Study 2015. The Lancet, 388(10053), 1545–1602.

Diterbitkan

2024-09-24

Cara Mengutip

Nugroho, R., & Kusnanto, H. (2024). SECURING THE RESTRICTED AREA AT INLET 491-AC1 FROM THE DANGER OF HOT MATERIAL DURING KILN UPSET BY INSTALLATION OF HEAT DETECTION EQUIPMENT AND MATERIAL SPILLAGE LEVEL. Rekayasa Sistem Energi Dan Manufaktur (ReSEM), 2(2), 101–108. Diambil dari https://journal.um-surabaya.ac.id/ReSEM/article/view/21903